Panasonic Cordless Phone KX-TGA652 Manual

The Panasonic KX-TGA652 is a DECT 6.0 cordless handset expansion unit compatible with Panasonic KX-TG series base stations. It features a large backlit LCD display, speakerphone, digital answering system compatibility, intercom, call waiting/caller ID, 9-number memory, 50-number phonebook, headset jack, and eco mode. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Base Station 7. Using Phone Features 8. Answering System Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Cordless Handset, Battery Pack, AC Power Adapter, Telephone Line Cord, User Manual.

Feature	Description
DECT 6.0 Technology	Clear sound, secure connection, reduced interference
Backlit LCD Display	Easy viewing in low light conditions
Speakerphone	Hands-free conversation
Caller ID/Call Waiting	Displays caller information on incoming calls
Intercom	Communication between handset and base/other handsets
9-number Memory Dial	Quick dial frequently used numbers
50-number Phonebook	Store contacts with name and number
Headset Jack (2.5mm)	Connect compatible headset for privacy
Eco Mode	Reduces power consumption when handset is near base
Digital Answering System	Compatible with base station answering system (if equipped)

Installation

Unpack and inspect contents. Place base station on stable surface.

Charge Handset Battery: Connect AC adapter to base and outlet. Place handset on base to charge for 7 hours before first use.
Connect Telephone Line: Plug telephone line cord from wall jack to TEL LINE jack on base station.
Power Base Station: Ensure AC adapter is securely connected.
Install Battery in Handset: Open battery compartment, connect battery connector, insert battery, close cover.

WARNING! Use only supplied Panasonic AC adapter and battery. Do not disassemble or short-circuit battery.

First-Time Setup

After charging, follow these steps.

Register Handset to Base: Place handset on base. Registration is usually automatic. If not, press and hold PAGE on base until IN USE light flashes, then press and hold TALK on handset until confirmation tone.
Set Date and Time: Use menu to set current date and time for accurate caller ID records.
Set Ringer Volume/Tone: Use VOLUME button or menu to select.
Program Phonebook/Memory: Enter contacts via menu.

CAUTION! Keep base station away from electrical appliances to avoid interference.

Specifications

Technology: DECT 6.0.
Frequency: 1.9 GHz.
Battery: Ni-MH rechargeable (included).
Talk Time: Up to 7 hours.
Standby Time: Up to 5 days.
Display: Backlit LCD with caller ID information.
Memory: 50-number phonebook, 9 speed dial, 30 caller ID history.
Intercom Range: Up to 50 meters indoors.
Power Source: AC adapter (input: 120V AC, 60Hz).
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Handset Controls: TALK, END, VOLUME UP/DOWN, MENU, Arrow Keys, INTERCOM, FLASH, REDIAL/PAUSE, MUTE, Speakerphone.

Base Station: PAGE button, IN USE light, TEL LINE jack, AC adapter jack.

Menu Settings: Ringer volume/tone, Phonebook, Caller ID setup, Date/Time, Handset Name, Intercom settings, Eco Mode On/Off, Language (English default), System reset.

Connecting to Base Station

Ensure base station is powered and telephone line connected.

Place handset on base to charge and auto-register.
If manual registration needed, use PAGE and TALK buttons as described.
For multiple handsets, register each to same base following same procedure.

Tip: Keep handset within range of base (approx. 50 meters indoors) for best performance.

Using Phone Features

Making/Receiving Calls: Press TALK to dial or answer; END to hang up.

Speakerphone: Press SPEAKER during call for hands-free.
Caller ID: View incoming call information on display.
Call Waiting: Press FLASH to answer second call.
Intercom: Press INTERCOM, then dial handset number or base (0).
Redial: Press REDIAL to call last number dialed.
Mute: Press MUTE during call to mute microphone.
Headset Use: Plug 2.5mm headset into jack for private listening.

WARNING! Do not use phone during electrical storm. Use caution when installing near electrical appliances.

Answering System Operation

If base has digital answering system:

Play Messages: Press PLAY/STOP on base or use handset menu.
Record Greeting: Follow base instructions (usually press RECORD).
Remote Message Retrieval: Call from outside, enter remote access code (default often 9999).

Answering system settings adjusted via base station controls.

Care & Cleaning

Unplug base from power before cleaning. Use dry, soft cloth. Do not use liquids or aerosols.

CAUTION! Avoid moisture and extreme temperatures. Clean handset and base regularly to maintain performance.

Regulatory Information

FCC Part 15 and Part 68 compliant. This device complies with FCC RF exposure limits for uncontrolled environments. Copyright © Panasonic Corporation of North America. For support, visit www.panasonic.com or contact 1-800-211-7262.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No dial tone	Line/power connection	Check telephone line cord connections; ensure base is powered.
Handset not charging	Battery/contacts	Ensure handset properly seated on base; clean charging contacts; replace battery if old.
Poor sound quality	Interference/low battery	Move away from electronics; recharge handset.
Handset not registered	Registration lost	Re-register handset to base (see Installation).
Caller ID not working	Service/subscription	Ensure caller ID service subscribed from phone company; check date/time settings.

Reset: Menu > Settings > System > Reset to restore defaults.

Service: 1-800-211-7262; www.panasonic.com