panasonic cordless phones kx tga470 manual

The Panasonic KX-TGA470 is a DECT 6.0 cordless handset expansion unit designed for use with compatible Panasonic base systems. It features a large backlit LCD display, speakerphone, digital answering system compatibility, intercom, call waiting/caller ID, eco mode, and up to 10 hours of talk time. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Cordless Handset, Battery Pack, AC Power Adapter, Telephone Line Cord, Belt Clip.

Installation

Unpack and inspect contents. Place base unit on a stable surface.

1. Install Battery: Insert battery pack into handset, connect terminals, place cover.
2. Charge Handset: Place handset on base unit or charger; charge for 7 hours before first use.
3. Connect Base Unit: Plug telephone line cord into base and wall jack.
4. Connect Power: Plug AC adapter into base and electrical outlet.

WARNING! Use only supplied Panasonic adapter and battery. Do not disassemble or short-circuit battery.

First-Time Setup

Power on handset and base; follow prompts.

1. Register Handset: Place on base; registration is usually automatic. If not, press and hold base PAGE until IN USE flashes.
2. Set Language: Use menu to select ENGLISH (default).
3. Set Time/Date: Enter menu to set current time and date for caller ID.
4. Adjust Ringer/Volume: Use volume keys and menu settings.

CAUTION! Ensure proper ventilation; keep away from heat sources.

Specifications

• Technology: DECT 6.0.
• Frequency: 1.9 GHz.
• Range: Up to 50 meters indoors.
• Display: Backlit LCD with caller ID.
• Battery: Ni-MH rechargeable.
• Talk Time: Up to 10 hours.
• Standby Time: Up to 5 days.
• Power Source: AC adapter (input 100-240V).
• Operating Temp: 0°C to 40°C.

Controls and Settings

Access menu via MENU button. Front Keys: TALK/FLASH, OFF, DIR, INTERCOM, MUTE, VOLUME, MENU, CID.

Display Icons: Battery, Ringer Off, Key Lock, Speakerphone, Eco Mode.

Menu Settings: Ringer melody/volume, Handset name, Time/Date, Language, Answering system settings, Call block, Key tone, Auto talk. Eco Mode: Reduces transmission power when near base.

Connecting to Base Unit

Registration required for each handset.

1. Ensure base is powered on.
2. Place handset on base; wait for beep and registration confirmation.
3. If manual registration needed: Press and hold PAGE on base until IN USE flashes, then press # on handset.

Tip: Keep handset within range during registration.

Making and Receiving Calls

Supports standard telephone functions.

1. Make Call: Press TALK, dial number, or dial first then press TALK.
2. Answer Call: Press TALK or any key (if auto talk on).
3. End Call: Press OFF or place on charger/base.
4. Speakerphone: Press SPEAKER during call.
5. Mute: Press MUTE during call.
6. Call Waiting: Press FLASH to answer second call.
7. Redial: Press TALK then REDIAL.

WARNING! Do not use near medical equipment; may cause interference.

Advanced Features

Intercom: Press INTERCOM, select handset/base, press TALK. Caller ID: Stores up to 50 entries; press CID to review. Call Block: Add numbers to block list via menu. Answering System: Access messages by pressing and holding 1 (requires compatible base).

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth; do not use chemicals or abrasives.

CAUTION! Keep handset dry; avoid extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian standards. Copyright © Panasonic Corporation; trademarks owned by Panasonic. For support, visit www.panasonic.com or contact 1-800-211-7262.

Troubleshooting

Reset: Remove battery, unplug base, wait 1 minute, reconnect.

Service: 1-800-211-7262; www.panasonic.com