Panasonic Cordless Phones KX TGF370 Manual

The Panasonic KX TGF370 is a DECT 6.0 cordless phone system with a digital answering machine, featuring a two-handset design, backlit keypad, call blocking, intercom, speakerphone, and ECO mode for reduced power consumption. It offers clear sound quality, a large display, and compatibility with hearing aids (TIA-1083 compliant). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Answering Machine 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Base unit with answering machine, Handset(s), Telephone line cord, AC power adapter, Battery pack(s), Belt clip(s).

Feature	Description
DECT 6.0 Technology	Clear, secure digital signal with reduced interference
Digital Answering Machine	Records up to 18 minutes of messages; remote access
Two Handsets	Includes one base handset and one additional handset
Backlit Keypad & Display	Easy dialing and viewing in low light
Call Block	Blocks up to 250 numbers
Intercom	Handset-to-handset and handset-to-base communication
Speakerphone	Hands-free conversation on base and handset
ECO Mode	Reduces power consumption when idle
Hearing Aid Compatible	TIA-1083 compliant
Battery Indicator	Shows remaining battery level on display

Installation

Unpack and inspect contents. Place base unit on flat surface.

Charge handset batteries: Connect AC adapter to base, plug into outlet. Place handset(s) on base to charge for 7 hours before first use.
Connect telephone line: Plug one end of telephone cord into TEL LINE jack on base, other end into wall telephone jack.
Install battery: Insert battery pack into handset, aligning polarity. Charge fully.
Register additional handset: Follow on-screen prompts to sync with base.

WARNING! Use only supplied Panasonic AC adapter and battery. Do not expose to water or extreme temperatures.

First-Time Setup

Power on base and handset; follow prompts.

Set date and time: Press MENU on handset, select SETTINGS > DATE/TIME.
Set language: In SETTINGS menu, select ENGLISH (default).
Set answering machine: Record outgoing message; set number of rings before answer.
Adjust ringer volume and tone: Use VOLUME buttons and MENU options.

CAUTION! Ensure proper ventilation around base unit; avoid heat sources.

Specifications

Technology: DECT 6.0 digital.
Frequency: 1.9 GHz.
Range: Up to 1000 feet outdoors, 150 feet indoors (may vary).
Answering Machine: Digital, 18-minute recording time.
Display: Backlit LCD on handset and base.
Battery: Rechargeable Ni-MH (included), talk time up to 10 hours.
Power Source: AC adapter (input: 120V AC, 60Hz).
Compatibility: Hearing aid compatible (TIA-1083), VoIP compatible.
Caller ID: Stores up to 50 calls (subscription required from service provider).

Controls and Settings

Access menu via MENU button on handset. Base Controls: ANSWER ON/OFF, VOLUME, PLAY/STOP (answering machine).

Handset: TALK/CALL BACK, OFF, MENU, INTERCOM, VOLUME, FLASH, REDIAL, MUTE, SPEAKERPHONE, numeric keypad.

Settings: Date/Time, Language, Ringer tone/volume, Answering machine settings, Call block list, ECO mode on/off. Answering Machine: Record outgoing message, set number of rings (2, 4, 6, TOL), listen to messages.

Connecting Devices

Telephone line: Standard RJ11 jack. Additional handset: Register via base.

Turn off power before connecting.
Connect telephone line cord to TEL LINE jack on base.
For VoIP: Connect base to VoIP adapter or router phone port.
Register handset: Place in base, press and hold PAGE on base until IN USE light flashes.

Tip: Ensure telephone service is active. Test by lifting handset and listening for dial tone.

Using the Answering Machine

Digital answering machine with remote access.

Record outgoing message: Press MENU > ANSWERING MACHINE > OUTGOING MESSAGE.
Set answer mode: Choose ANSWER ON, ANSWER ONLY, or OFF.
Play messages: Press PLAY/STOP on base or MENU > PLAY MESSAGES on handset.
Delete messages: Press DELETE during playback.
Remote access: Dial your number from outside, press * during outgoing message, enter remote code (default 0000).
Announcement Only: Record message without taking messages.

WARNING! Do not disconnect power while answering machine is in use to avoid message loss.

Accessibility Features

Hearing Aid Compatibility: TIA-1083 compliant. Ringer Volume Adjustment: Multiple levels including extra loud. Visual Ringer Indicator: Flashing light on base for incoming calls.

Care & Cleaning

Unplug from power before cleaning. Wipe with soft, dry cloth. Do not use liquids or abrasive cleaners.

CAUTION! Avoid moisture; keep away from sinks, bathtubs, and humid areas.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This device complies with Part 15 of the FCC Rules. Copyright © Panasonic Corporation of North America. For support, visit www.panasonic.com or contact 1-800-211-7262.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No dial tone	Line/power connection	Check telephone line connections; ensure base is powered on.
Handset not charging	Battery/contacts	Ensure handset properly seated on base; clean charging contacts; replace battery if old.
Poor sound quality	Interference/distance	Move closer to base; avoid electronic interference (microwaves, routers).
Answering machine not working	Settings/power	Ensure ANSWER ON is selected; check power connection.
Handset not registered	Registration process	Re-register handset to base (see Installation section).

Reset: Unplug base power for 60 seconds, then reconnect.

Service: 1-800-211-7262; www.panasonic.com