Panasonic KX TGE470 User Manual

The Panasonic KX TGE470 is a DECT 6.0 cordless phone system featuring a digital answering machine, call blocking, intercom, speakerphone, and backlit keypad. It supports up to 6 handsets, offers a 100-name/number phonebook, caller ID, and a headset jack. Powered by AC adapter and rechargeable battery. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Answering Machine 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Base Unit with answering machine, Cordless Handset, AC Power Adapter, Telephone Line Cord, Rechargeable Battery, Belt Clip.

Feature	Description
DECT 6.0 Technology	Clear sound, secure connection, up to 6 handsets
Digital Answering Machine	Records up to 18 minutes of messages
Call Block	Blocks unwanted calls from up to 250 numbers
Intercom	Handset-to-handset and handset-to-base communication
Speakerphone	Full-duplex speakerphone on handset and base
Backlit Keypad & Display	Easy dialing in low light
Phonebook	Stores up to 100 names/numbers
Caller ID/Call Waiting	Displays caller information (service required)
Headset Jack	2.5mm jack for hands-free use
Battery Indicator	Shows remaining battery level

Installation

Unpack and inspect contents. Place base unit on a flat, stable surface.

Charge the handset: Insert battery, place handset on base for 7 hours initial charge.
Connect telephone line: Plug line cord from wall jack to TEL LINE jack on base.
Connect power: Plug AC adapter into base and electrical outlet.
Install additional handsets: Register new handsets to base (see manual).

WARNING! Use only the supplied Panasonic AC adapter and battery. Do not disassemble or short-circuit the battery.

First-Time Setup

After installation, power on the system and configure basic settings.

Set date and time: Press MENU on handset, select SETTINGS > DATE & TIME.
Set language: In SETTINGS menu, select LANGUAGE (default ENGLISH).
Program phonebook: Add entries via MENU > PHONEBOOK > ADD ENTRY.
Set answering machine: Press ANS/PLAY on base to record greeting and set answer mode.

CAUTION! Keep base unit away from heat sources and water. Ensure proper ventilation.

Specifications

Technology: DECT 6.0 cordless.
Frequency: 1.9 GHz.
Range: Up to 50 meters indoors.
Battery: Rechargeable Ni-MH (included).
Talk Time: Up to 7 hours per charge.
Standby Time: Up to 5 days.
Answering Machine: Digital, 18 minutes recording time.
Phonebook Capacity: 100 entries.
Call Block: 250 numbers.
Power Source: AC adapter (input: 120V AC, 60Hz).

Controls and Settings

Access menu via MENU button on handset. Front Panel (Base): ANS/PLAY, VOLUME, DELETE, RECORD.

Handset: TALK/CALL BACK, OFF, MENU, INTERCOM, FLASH, REDIAL/PAUSE, MUTE, VOLUME, Navigation arrows, SELECT.

Settings: Date/Time, Language (ENGLISH/ESPAÑOL/FRANÇAIS), Ringer Volume/Tone, Handset Name, Call Block List, Phonebook. Answering Machine: Record Greeting, Set Answer Mode (Toll Saver, Announce Only, Remote), Play Messages.

Connecting Devices

Telephone Line: Standard RJ11 cord. Headset: 2.5mm plug to headset jack on handset.

Ensure phone is off (handset on base) before connecting.
Plug line cord securely into wall jack and base unit.
For headset, insert plug into jack on side of handset.

Tip: Use a surge protector for telephone line to protect against power surges.

Using the Answering Machine

Digital answering machine with remote access.

Record greeting: Press and hold RECORD on base, speak, release.
Set answer mode: Press ANS/PLAY repeatedly to cycle modes (ANS ON, ANS ON/TOLL SAVER, ANNOUNCE ONLY).
Play messages: Press ANS/PLAY on base or handset.
Delete messages: Press DELETE during playback.
Remote access: Dial your number, after greeting, enter remote code (default 0000) to play messages.

WARNING! Do not disconnect power while answering machine is in use to avoid message loss.

Accessibility Features

Ringer Volume/Tone Adjustment: Set via MENU > SETTINGS > RINGER. Hearing Aid Compatible: Rated M3/T3. Visual Ringer Indicator: Flashing LED on base for incoming calls.

Care & Cleaning

Unplug from power before cleaning. Wipe with soft, dry cloth. Do not use liquid or aerosol cleaners.

CAUTION! Avoid moisture. Keep handset and base away from liquids.

Regulatory Information

FCC Part 15 and Part 68: Complies with limits for Class B digital devices and telephone equipment. This device may not cause harmful interference and must accept any interference received. For support, visit www.panasonic.com or contact 1-800-211-7262. Copyright © Panasonic Corporation of North America. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No dial tone	Line/power connection	Check line cord connections; ensure base is powered.
Handset not charging	Battery/contacts	Clean charging contacts; ensure handset seated properly; replace battery if old.
Poor sound quality	Interference/low battery	Move base away from electronics; recharge handset.
Answering machine not working	Settings/power	Ensure ANS ON mode selected; check power connection.
Caller ID not displaying	Service/subscription	Subscribe to Caller ID service from phone company; ensure correct setup.

Reset: MENU > SETTINGS > SYSTEM > RESET to restore factory defaults.

Service: 1-800-211-7262; www.panasonic.com